Download the self-extracting archive and run it. When you run it, it will extract the files to a temporary directory, run the installation wizard, and remove the temporary files when the installation is complete. All language files are embedded in this archive. You do not need to download an extra language pack.

See readme.htm if you want to extract the files without installing.

This software may also apply to Intel Ethernet Controllers. Support for built-in network connections is provided by the system or board manufacturer.

The software drivers provided on this page are generic versions and can be used for general purposes. However, computer original equipment manufacturers (OEMs) may have altered the features, incorporated customizations, or made other changes to the software or software packaging they provide. To avoid any potential installation incompatibilities on your OEM system, Intel recommends that you check with your OEM and use the software provided via your system manufacturer. Intel or the computer original equipment manufacturer (OEM) may not provide technical support for some or all issues that could arise from the usage of this generic version of software drivers.

What's New:

  • None for this release. Although Intel® 800 Series Ethernet Driver (AArch64) v4.2.34 option is presented in the BootUtil tool, Arm Servers are not supported in this release.
  • Azure Stack HCI 23H2 OS support.
  • RX Timestamp support on E810.
  • Traffic Mirroring via tc-mirred on E810.
  • Control FW debug logs level via debugfs on E810.
  • Flexible VF loopback pacing configuration on E810.
  • SyncE4L NIC chaining improvements on E810.
  • PHY Statistics Dumps on E810.
  • Devlink health support for Tx hang debugging on E810.
  • HII VLAN function configuration support for E810 OEMGen devices.
  • DMA_buf w/o ODP support for Linux RDMA.
  • FreeBSD E810 - Count packets larger than RX MAX as Rx Oversize packets.
  • Print NIC FW version on E810.
  • FreeBSD X710 - Count packets larger than RX MAX as Rx Oversize packets.
  • Log FW Failure Critical Data in Recovery Mode.
  • NVMUpdate option to use FW Version to determine if update is upgrade or downgrade.
  • Driver can provide debug log when TX unit hang occurs on E810.
  • Set E810 debug level and UART option when driver is working.
  • Enable E810 GPUDirect community solution: DMA_BUF without ODP.
  • Complete release notes.

Supported Products:

  • Intel Ethernet Network Adapter I225-T1
  • Intel Ethernet Server Adapter I210-T1
  • Intel Ethernet Converged Network Adapter X540-T2
  • Intel Ethernet Converged Network Adapter X540-T1
  • Intel Ethernet Controller X540-AT2
  • Intel Ethernet Converged Network Adapter X520-DA1
  • Intel Ethernet Converged Network Adapter X550-T1
  • Intel Ethernet Controller I350-AM2
  • Intel Ethernet Controller I350-BT2
  • Intel Ethernet Controller I350-AM4
  • Intel Ethernet Controller X540-BT2
  • Intel Ethernet Controller X550-AT2
  • Intel Ethernet Controller X550-BT2
  • Intel Ethernet Server Adapter I350-F2
  • Intel Ethernet Server Adapter I350-T4V2
  • Intel Ethernet Converged Network Adapter X550-T2
  • Intel Ethernet Controller I210-CL
  • Intel Ethernet Converged Network Adapter X520-SR2
  • Intel Ethernet Converged Network Adapter X520-DA2
  • Intel Ethernet Converged Network Adapter X520-LR1
  • Intel Ethernet Converged Network Adapter X520-T2
  • Intel Ethernet Controller I210-AS
  • Intel Ethernet Controller I210-IS
  • Intel Ethernet Controller I210-AT
  • Intel Ethernet Server Adapter I350-T2V2
  • Intel Ethernet Controller X550-AT
  • Intel 82599EN 10 Gigabit Ethernet Controller
  • Intel 82599ES 10 Gigabit Ethernet Controller
  • Intel Ethernet Converged Network Adapter X520-QDA1
  • Intel Ethernet Server Adapter I350-F4
  • Intel Ethernet Controller I210-IT
  • Intel 82599EB 10 Gigabit Ethernet Controller
  • Intel Ethernet Controller I210-CS
  • Intel Ethernet Converged Network Adapter X520-SR1
  • Intel Ethernet Controller I211-AT

Previous versions: